Drone Update
Update Instructions:
  • Copy this Drone Update file to the root of the SD card.
  • Place it into the camera and power cycle the drone.
  • The camera LED will flash red, after which all LEDs will flash red. They will go green one at a time and then turn off.
  • Do not unplug or turn off the drone. After several minutes, all LEDs will show yellow (upodating), followed a few seconds later by green (update success). The camera LED will then go red, after which all LEDS are turned off. At this point, the drone has been updated. Power cycling will then cause the drone to upload to the web site after the power up tests.
  • The drone will remove the update file from the camera SD card to prevent continuous updates.